Mikrotik Switching With Labs

Free Download Mikrotik Switching With Labs
Published 6/2023
MP4 | Video: h264, 1280×720 | Audio: AAC, 44.1 KHz
Language: English | Size: 5.64 GB | Duration: 5h 19m
Understand all switching topics on MirkoTik RouterOS v7 and be ready for the MTCSWE exam

What you’ll learn
Understand the types of MikroTik Switching
Understand the deployment of MTU in the switching environement
Understand and configure all types of VLANs on MikroTik switching (Port-based, Mac-based, VLAN Management, Q-in-Q)
Understand the usage of Tag Stacking
Understand the usage of Ingress Filtering
Configure VLAN’s using MikroTik Switch chip
Understand and configure all types of Spanning-Tree Protocol on the MikroTik switch (STP, RSTP, MSTP)
Understand and configure Port Isolation (Isolated Groups & Private VLAN)
Understand and configure Bridge Horizon on the MikroTik Switch
Understand and configure Quality of Service (QOS) on the MikroTik Switch
Work on different tools available on the MikroTik switch
Know how to harden the MikroTik switch against different weaknesses
Know how to use and use MikroTik SwitchOS (SWOS)
Understand and configure Link Aggregation (Bonding) on the MikroTik switch
Requirements
Be familiar with MikroTik with at least MTCNA level
Description
MikroTik switching was never been important as it is now. The fact that MikroTik is doing very high performance and reliable switches, make everyone needed to know how to use MikroTik switches and how to configure them.For this reason, I have decided to make this video course speaking only about switching topics in MikroTik. I will pass through all topics that a MikroTik switch can do so you will have a deep understanding of configuring a MikroTik switching environement.In this course, I am going to focus on the MikroTik CRS3xx series switch which is the best ever switch that MikroTik has already done. I will be using real equipment during the course because it is not possible to emulate a switching environment in an emulation software like GNS3.Additionally, this course will prepare you to be ready for the MikroTik switching MTCSWE exam which is one of the most difficult exam that is provided by MikroTik.To be able to repeat the LABS, I advise you to have at least 2 x CRS300 series switches and 1 MikroTik router (HAP lite). Remember, the more you practise the LAB the better the information became easier to be understood and remembered.Finally, I hope that you will decidide to join the course and have a journey by learning MikroTik switching with me.
Overview
Section 1: Intro to MikroTik Switching
Lecture 1 Introduction to MikroTik Swtiching
Section 2: Maximum Transmission Unit (MTU)
Lecture 2 What is the Maximum Transmission Unit (MTU)
Lecture 3 LAB – MTU
Section 3: Virtual Local Area Network (VLAN)
Lecture 4 VLAN Explanation
Lecture 5 Port Based VLAN
Lecture 6 Configuring Q-in-Q usng Hardware Offloading
Lecture 7 Configuring VLAN Management
Lecture 8 Dynamic Entries in Bridge VLAN and Ingress Filtering
Lecture 9 MAC Based VLAN
Lecture 10 VLAN Tag Stacking
Section 4: Spanning-Tree Protocol (STP, RSTP & MSTP)
Lecture 11 Explaining Problems on Redundant switching without using STP
Lecture 12 Explanation of how Spanning-Tree works
Lecture 13 Interfaces States in STP
Lecture 14 Configure Classing STP on MikroTik Switches
Lecture 15 Topology Change Notification in Spanning-Tree
Lecture 16 Difference between STP and RSTP
Lecture 17 Understand the Negotiation Mechanism in RSTP
Lecture 18 Configuring Rapid STP on MikroTik Switches
Lecture 19 What is Multiple Spanning-Tree Protocol
Lecture 20 Configuring MSTP on MikroTik Switches
Section 5: Link Aggregation (Bonding)
Lecture 21 What is Link Aggregation (Bonding)?
Lecture 22 Configuring Bonding using LACP and Balance-rr
Section 6: Port Isolation
Lecture 23 Understanding and Configuring Port Isolation using Isolated Groups
Lecture 24 Understanding and Configuring Private VLAN.tscproj
Lecture 25 Bridge Horizon on MikroTik Switching
Section 7: Layer 2 Quality of Service (L2 QOS)
Lecture 26 L2 QOS – Explanation
Lecture 27 L2 QOS without switch chip (software offloaded)
Lecture 28 L2 QOS with switch chip (hardware offloaded)
Engineers who want to deploy MikroTik switching in their network,Students who want to prepare for the MikroTik Switching MTCSWE exam
Homepage

www.udemy.com/course/mikrotik-switching-with-labs/